Power Generation Industry

RECON Series 1250 & 2500 Tube Leak Test Guns

Those at utilities with boiler and heat exchanger responsibilities are challenged to juggle tasks such as meeting customer needs and shifting schedules around. You are under many pressures to get the job done quickly and cost effectively while maintaining top-notch quality. The last thing you should have to worry about is the quality or availability of your tube tools.

Tools For Power Generation Industry >>

RECON Series 1500 Tube Leak Test Gun

RECON Series 1500 Tube Leak Test Gun

Intelligently designed and battle tested for impossible missions. Take on the mission of quickly and easily finding tube leaks. Utilize the RECON Series tube leak test ... Read More

Categories: Tube Testers

RECON Series 1250 & 2500 Tube Leak Test Guns

RECON Series 1250 & 2500 Tube Leak Test Guns

Intelligently designed and battle tested for impossible missions. Take on the mission of quickly and easily finding tube leaks. Utilize the RECON Series tube leak test ... Read More

Categories: Tube Testers

24 Series Condenser Expander

24 Series Straight Boiler Expander

Elliott’s 24 Series Condenser Expanders are ideal for expanding tubes in chillers, heat exchangers, feedwater heaters, fin fan coolers, and surface condensers. The 24 Series Condenser ... Read More

Categories: Tube Expanders

445 Series Right Angle Pneumatic Rolling Motors

445 Series: Right Angle Pneumatic Torque Control Motor with Lever 90RPM

The quality you need. The compatibility you want. Elliott offers the 445 Series Motors in both roll and lever throttle for tube sizes 2.000” (50.8mm) to ... Read More

Categories: Tube Installation, Tube Rolling Motors

99 Series Electric Rolling Motors

Electric Rolling Motors

Always on, always precise. Electricity offers better consistency when rolling tubes and is more readily available than air. However, in the past, ... Read More

Categories: Tube Rolling Motors

Tube Tugger

Tube Tugger

Elliott's Model 80-40125 Tube Tugger is a powerful continuous hydraulic tube pulling system for removing any type of tube material effortlessly from heat exchangers, ... Read More

Categories: Tube Removal

5370 Jiffy Gun Kit

5370 Jiffy Gun Tube Cleaner

The Jiffy Gun is powered by an air and water combination to propel Elliott Tool's wide range of reusable shoot through devices. Soft deposits such ... Read More

Categories: Tube Cleaners

Pneumatic Hammer

Pneumatic Hammer

Elliott's 430G Pneumatic Hammer is the recommended driving tool for Elliott's Beading Tools and Flaring Tools. Beading Tools are made with different size ... Read More

Categories: Tube Installation

Turbine Style Curved Tube Cleaners 1100 Series

1100 Series Turbine Style Curved Tube Cleaner

Elliott Tool's 1100 Series Air Turbine Style Curved Tube Cleaners are ideal for 5.000” to 13.225” ID curved tubes (127.00mm to 335.92mm). The ... Read More

Categories: Turbine Style Tube Cleaners

ELC110220 Electric Torque Controller

ELC110220 Electric Torque Controller

Elliott is pleased to introduce its ELC110220 Electric Torque Controller the first torque control with an Embedded Logic Controller that senses and is compatible ... Read More

Categories: Tube Installation

Super Tube Tugger

Super Tube Tugger

Elliott's Model 80-40200 Super Tube Tugger is a powerful continuous hydraulic tube pulling system for removing any type of tube material effortlessly from boilers ... Read More

Categories: Tube Removal

537100C Jumbo Jiffy Gun

537100C Jumbo Jiffy Gun Tube Cleaner

The Jumbo Jiffy Gun is powered by an air and water combination to propel Elliott's wide range of reusable shoot through devices. Soft ... Read More

Categories: Tube Cleaners

Tube End Facers

Tube End Facer

Elliott's ETF Series Tube End Facers are ideal for trimming heat exchanger, condenser, and chiller tubes to a specific tube projection after tube expansion. ... Read More

Categories: Tube Installation

One-Piece Tube Plugs

One-Piece Tube Plug

Elliott's One-Piece Tube Plugs cover a wide tube OD range, making them ideal for sealing leaky tubes in both heat exchangers and boilers. ... Read More

Categories: Tube Plugs

Pneumatic Hammer

Pneumatic Hammer

Elliott's 430G Pneumatic Hammer is the recommended driving tool for Elliott's Knockout Tools and Collapsing Tools to remove tube stubs in heat exchangers or ... Read More

Categories: Tube Removal

Stub Tugger

Stub Tugger Tube Puller

Elliott's Model 80-40130 Stub Tugger is a powerful continuous hydraulic tube pulling system for removing tubes from both heat exchangers and boilers. ,/p> The ... Read More

Categories: Tube Removal

Soot Buster

Soot Buster Tube Cleaner

Soot Buster M5784-00, for cleaning firetube boilers, is a pneumatically actuated cleaning tool that propels itself inside of tubes at 1.5 feet per second ... Read More

Categories: Tube Cleaners

Tube Pilots/Guides

Tube Pilots/Guides

Elliott's 63 Series Tube Pilots, also known as Tube Guides, are used to pilot replacement tubes through tube sheets and tube support plates that ... Read More

Categories: Tube Installation

Two-Piece Tube Plugs

Two-Piece Tube Plug

Elliott's Two-Piece Tube Plugs offer more sealing compared to One-Piece Plugs. The tapered pin is driven into the ring, which is tapered on ... Read More

Categories: Tube Plugs

Torque Controlled Pneumatic Rolling Motors

Torque Controlled Pneumatic Rolling Motors

Elliott offers the Midi/Maxi™ Series for tube sizes 0.375” (9.5mm) to 2.000” (50.8mm) to suit your tube expansion needs. The Midi/Maxi Series Pneumatic Rolling Motors ... Read More

Categories: Tube Rolling Motors

Hydraulic Pumps

Hydraulic Pump

Elliott's hydraulic pumps are used to power the Collet Style Tube Tugger, Cyclgrip Semi-Continuous Puller, Tube Tuggers, and Stub Tugger. The hydraulic pumps' ... Read More

Categories: Tube Removal

Roto-Jet I & II Tube Cleaning Systems

Roto-Jet I & II Tube Cleaning Systems

Elliott Tool Roto-Jet Cleaning Systems are an effective solution to increasing chiller, condenser, and other heat exchanger efficiency. Elliott Tool offers a variety ... Read More

Categories: Tube Cleaners

Lubricants Tube Expander Accessories

Lubricants Tube Expander Accessories

Elliott”s Lubricants are engineered to provide the best lubrication in tube rolling and roll beading applications. They will provide time and tool savings compared ... Read More

Categories: Tube Installation

High Pressure Tube Plugs

High Pressure Tube Plug

Elliott's High Pressure Tube Plugs provide positive sealing in excess of 6,500 PSI (448.2 bar), making them ideal for high pressure applications such as ... Read More

Categories: Tube Plugs

Stall Torque Pneumatic Rolling Motors

Stall Torque Pneumatic Rolling Motors

Elliott's Stall Torque Pneumatic Rolling Motors are the most powerful motor available for rolling tubes in extreme applications. The motors are recommended for ... Read More

Categories: Tube Rolling Motors

Manual Tube Puller

Manual Tube Puller

Elliott's Model 904500 Manual Tube Puller is ideal for pulling a limited number of tubes in heat exchangers, chillers, fin fan coolers, and surface ... Read More

Categories: Tube Removal

Die-Hard™ Chiller Tube Cleaner

Die-Hardâ„¢ Cableless Tube Cleaner

Elliott Tool's Die-Hard™ is the first cableless tube cleaner that successfully cleans light to medium deposits found in chiller, condenser, and heat exchanger tubes. ... Read More

Categories: Tube Cleaners

900 Series Flaring Boiler Expanders

900 Series Flaring Boiler Expander

Elliott's 900 Series Flaring Boiler Expanders are self-feeding, specifically made for use in superheaters in watertube boilers or evaporator tubes. In only one ... Read More

Categories: Tube Expanders

One-Revolution Tube Cutter

One-Revolution Tube Cutter

Elliott's 9060 Series One-Revolution Tube Cutters cut tubes quickly in both heat exchangers and boilers. Recommended for hand use only with the ... Read More

Categories: Tube Removal

4480 Series Single Roll Beading Expanders

4480 Series Single Roll Beading Expander

Elliott's 4480 Series Single Roll Beading Expanders expand the tube into the tube sheet while forming a bead at the end of the ... Read More

Categories: Tube Expanders

Jumbo Tube Buster

Jumbo Tube Buster

Elliott's 430D Jumbo Tube Buster is the recommended driving tool for Elliott's Jumbo Knockout Tools to remove tube stubs in heat exchangers, firetube boilers, ... Read More

Categories: Tube Removal

5224XL Heat Exchanger Cleaner

5224XL Heat Exchanger Tube Cleaner

Elliott Tool's Heat Exchanger Tube Cleaners utilize a rigid shaft to provide high torque cleaning to remove hard deposits often found in heat exchanger ... Read More

Categories: Tube Cleaners

1500 Series Flaring Boiler Expanders

1500 Series Flaring Boiler Expander

Elliott's 1500 Series Flaring Boiler Expanders are self-feeding, specifically made for use in firetube and watertube boilers. In only one operation, these expanders ... Read More

Categories: Tube Expanders

PTTC Series Tube Cutter

PTTC Series Tube Cutter

Elliott's PTTC (Push Type Tube Cutter) Series Cutters accommodate heat exchangers and boilers with tube OD sizes 0.625” to 2.500” (15.9 to 63.5mm) with ... Read More

Categories: Tube Removal

TT Tube Spears

TT Tube Spear

Elliott's TT Spears are used with the Elliott Tube Tugger or Super Tube Tugger to successfully pull tubes in chillers, heat exchangers, condensers, fin ... Read More

Categories: Tube Removal

Turbine Style Straight Tube Cleaners D600 Series

D600 Series Turbine Style Straight Tube Cleaner

Elliott Tool's D600 Series Air Turbine Style Straight Tube Cleaners are ideal for 0.495” to 1.730” ID tubes (12.57mm to 43.94mm) commonly found in ... Read More

Categories: Turbine Style Tube Cleaners

3400 Series Flaring Boiler Expanders

3400 Series Flaring Boiler Expander

Elliott's 3400 Series Flaring Boiler Expanders are the recommended tube expanders for expanding and flaring tubes in watertube and firetube boilers. The prong ... Read More

Categories: Tube Expanders

PTTC Series Tube Cutter Drive Motors

Tube Cutter Drive Motors

Elliott's Tube Cutter Drive Motors are used to power the PTTC Series Tube Cutter. They are available in both electric and pneumatic ... Read More

Categories: Tube Removal

Tube Hole Gauges

Tube Hole Gauge

Elliott's Tube Hole Gauges make it easy to accurately measure tube IDs and tube sheet holes found in vessels such as heat exchangers, chillers, ... Read More

Categories: Tube Installation

Turbine Style Straight Tube Cleaners 1300 Series

1300 Series Turbine Style Straight Tube Cleaner

Elliott Tool's 1300 Series Air Turbine Style Straight Tube Cleaners are ideal for 1.750” to 3.999” ID (44.5mm to 101.6mm) commonly found in firetube ... Read More

Categories: Turbine Style Tube Cleaners

3300 Series Straight Boiler Expanders

3300 Series Straight Boiler Expander

Elliott's 3300 Series Straight Boiler Expanders are the preferred tube expanders for expanding tubes in firetube boilers or in self-contained steam boiler units. ... Read More

Categories: Tube Expanders

376 / 396 Series Boiler Tube Cutter

376 / 396 Series Boiler Tube Cutter

Elliott's 376 / 396 Series Boiler Tube Cutters are power driven to cut those tubes in firetube and watertube boilers. The Series' primary ... Read More

Categories: Tube Removal

Tube Sheet Hole Brushes

Tube Sheet Hole Brush

Elliott's Tube Sheet Hole Brushes clean and remove hard deposits from tube sheets and support plate holes in surface condensers and heat exchangers. ... Read More

Categories: Tube Installation

Turbine Style Straight Tube Cleaners 1100 Series

1100 Series Turbine Style Straight Tube Cleaner

Elliott Tool's 1100 Series Air Turbine Style Straight Tube Cleaners are ideal for tubes 2.250” to 13.225” ID (57.2mm to 335.9mm) commonly found in ... Read More

Categories: Turbine Style Tube Cleaners

DRE Series Deep Roll Boiler Expanders

DRE Series Deep Roll Boiler Expander

Elliott's DRE Series Deep Roll Boiler Expanders are used for deep and hard rolling of steam and mud drums found in high pressure boilers. ... Read More

Categories: Tube Expanders

Collet Style Tube Tugger

Collet Style Tube Tugger

Elliott's Model B10552-00 Collet Style Tube Tugger was designed especially for fast and efficient tube removal in condensers, chiller, and other heat exchangers. ... Read More

Categories: Tube Removal

Grooving (Serrating) Tools

Grooving (Serrating) Tool

Elliott's GT Series Grooving Tools, also known as Serrating Tools, can be used manually to clean up existing grooves or can be used in ... Read More

Categories: Tube Installation

Turbine Style Curved Tube Cleaners D600 Series

D600 Series Turbine Style Curved Tube Cleaner

Elliott Tool's D600 Series Air Turbine Style Curved Tube Cleaners are ideal for 0.791” to 2.124” ID curved tubes (20.1mm to 54.0mm). The ... Read More

Categories: Turbine Style Tube Cleaners

40 Series Straight Boiler Expanders

40 Series Straight Boiler Expander

Elliott's 40 Series Straight Boiler Expanders are recommended for re-rolling leaky tube joints in firetube boilers. Self-feeding, these expanders can be used by ... Read More

Categories: Tube Expanders

Cyclgrip Semi-Continuous Tube Puller

Cyclgrip Semi-Continuous Tube Puller

Elliott's M5630-00 Cyclgrip Semi-Continuous Tube Puller is an engineered product that continuously pulls chiller, heat exchanger, and condenser tubes after the tubes have been ... Read More

Categories: Tube Removal

Handhole Seat Grinder

Hand Hole Seat Grinder

Elliott's 7099-1 Hand Hole Seat Grinder is air-powered, light, easy to handle, and precision-engineered to reface boiler header seats. The Hand Hole Seat ... Read More

Categories: Tube Installation

Turbine Style Curved Tube Cleaners 1300 Series

1300 Series Turbine Style Curved Tube Cleaner

Elliott Tool's 1300 Series Air Turbine Style Curved Tube Cleaners are ideal for 2.125” to 4.999” ID curved tubes (54.0mm to 127.0mm). The ... Read More

Categories: Turbine Style Tube Cleaners

Collet Style Support Sheet Expanders

Collet Style Support Sheet Expander

Elliott's Collet Style Support Sheet Expanders are used with a handheld short stroke hydraulic ram and light weight, low-pressure hydraulic pump to support sheet ... Read More

Categories: Tube Expanders

-