Tube Tools - Tube Removal

Tube Cutters

Condensers And Heat Exchangers

PTTC Series Tube Cutters

Adustable collar. For tube sizes 5/8" - 2-1/2" OD.

One-Revolution Tube Cutters

Excellent tool for puncturing tubes prior to plugging. For tube sizes 1/2" - 2-1/2" OD.

Boilers

376 / 396 Series Tube Cutters

Tube cutters for firetube and watertube boilers. For tube sizes 2" - 3" OD.

Tube Pullers And Pumps

B10552-00 Collet Style Tube-Tugger

Collet style puller. Tube size range: 5/8" OD - 1" OD. 6-Ton pulling capacity. Auto grip & release pulling action.

M5630-00 Cyclgrip Semi-Continuous Tube Pullers

Ideal for quick pulling of tubes freed by Collet Style Tube-Tugger. Tube size range: 1/2" O.D - 1" OD. 5-Ton pulling capacity. Semi-continuous pulling action of about 10' per minute.

80-40125 Spear Style Tube-Tugger

Spear style puller. Tube size range: 5/8" OD - 1-1/4" OD. 30-Ton pulling capacity. Semi-continuous pulling action.

80-40200 Spear Style Super Tube-Tugger

Spear style puller. Tube size range: 1-1/2" OD - 2" OD. 60-Ton pulling capacity. Semi-continuous pulling action.

80-40130 Spear Style Stub Tugger

Spear style puller - uses universal spears. Tube size range: 3/8" OD - 2-1/2" OD. 30-Ton pulling capacity. 6" pulling stroke.

Hydraulic Pumps for Pullers

Click here to purchase separately from pullers. Electric or pneumatic pumps. Built to withstand rigors of field use.

904500 Manual Tube Pullers

Spear style puller - uses universal spears. Tube size range: 3/8" O.D. - 1" OD. Manual operation using impact wrench or hand wrench. Tubes pulled by hand.

Tube Ripper

Removes tubes from spears in seconds. A must accessory for any spear type tube puller. Light weight and easy to operate. Accommodates any tube OD or tube material, 14 BWG (.083" - 2.11mm) and lighter. Air driven at 90 PSI (6.2 bar).

Pneumatic Hammers and Accessories

Pneumatic Hammers

Two rugged models to choose from.

Knockout Tools / Drifts

Ideal for removing tube from tube sheet. Shank sizes available in Type No. 6 or No. 15.

Collapsing Tools

Used to collapse one end of the tube, then the tube is pulled from the other end. May be used with Pneumatic Hammer or by hand. Shank sizes available in Type No. 6.